Boiling Water Reactor Plant
Inside the boiling water reactor (BWR) vessel, a steam water mixture is produced when very pure water (reactor coolant) moves upward through the core absorbing heat. The major difference in the operation of a BWR from other nuclear systems is the steam void formation in the core. The steam-water mixture leaves the top of the core and enters the two stages of moisture separation, where water droplets are removed before the steam is allowed to enter the steam line. The steam line, in turn, directs the steam to the main turbine causing it to turn the turbine and the attached electrical generator. The unused steam is exhausted to the condenser where it is condensed into water. The resulting water is pumped out of the condenser with a series of pumps and back to the reactor vessel. The recirculation pumps and jet pumps allow the operator to vary coolant flow through the core and change reactor power.
BWR Reactor Vessel Assembly
Reactor Water Cleanup System
Decay Heat Removal
Reactor Core Isolation Cooling
Standby Liquid Control System
Emergency Core Cooling Systems
High Pressure Emergency Core Cooling Systems
Low Pressure Emergency Core Cooling Systems
Boiling Water Reactor Containments
