I am currently searching for new job opportunity in nuclear power plant. I have worked for 07 years in Chashma Nuclear Power Plant Unit-01 & Unit-02 (PWR Type) in Pakistan for 7 years as Senior Instrument & Control Engineer. I will highly appreciate if someone can help me in find new job. Following is detail of my work experience.

• Performed following duties during installation & commissioning phase of Power Plant.
  • Assistant Test Supervisor for Commissioning of different instrument & control systems.
  • Reviewed Commissioning procedures & suggested necessary Modifications.
  • Reported installation and commissioning deficiencies of I&C systems to main contractor.
  • Prepared 05 years spares list for I&C systems, Spares procured from local & foreign suppliers.
  • Ensured compliance of I&C Systems as per design documents, before provisional acceptance of Power Plant.
• Performed following duties as Section Head in I&C department after power plant put in operation.
  • Performed / Supervised preventive & corrective maintenance jobs during normal operation and planned / forced outage of plant.
  • Troubleshooting and root cause analysis of recurring problems.
  • Suggestions & Implementation of modifications in Control Logic & Graphical User Interface.
  • Hands-on experience on multiple DCS, PLC, Process Instrumentation and Supervisory Systems for 340 MW/3000 RPM Steam Turbine.
  • Preparation of annual financial budget estimates.
  • Written procedures for preventive & corrective maintenance jobs.
  • Inventory / Spares Management for smooth operation of plant.
  • Planning and Co-ordination for maintenance jobs during planned outage.
  • Periodically delivered lectures to Main Control room operators about different control systems during their re-training period.
• Worked on following Distributed Control Systems.
  • MaxDNA DCS by Metso Automation Max Control Systems. Operation of turbine is controlled by this DCS.
  • Symphony Harmony DCS by ABB. During plant start-up, shutdown and load rejection this DCS is used to dump turbine steam.
  • HOLLiAS MACS DCS by Beijing Hollysys Co. China. Plant process parameters are monitored by this DCS.
• Maintenance / Troubleshooting of following PLC’s.
  • Siemens SIMATIC S7-300 (CPU 313C, CPU 317-2DP)
  • Schneider Electric Modicon Quantum Unity CPU
• Performed Maintenance / Calibration of different types of process instrumentation.
• Worked on following Turbine Control & Supervisory Systems.
  • Digital Electro-Hydraulic Control System (DEH) for Turbine Control.
  • Turbine Supervisory Instrumentation (TSI), VM600 System by Meggit (Vibro-Meter), Switzerland. Checking/Calibration of TSI Sensors like Bearing Vibration, Rotor Position, Case Expansion etc.
  • Emergency Turbine Trip System.
  • Turbine Steam Dump System.
  • Turbine Steam Re-Heat & Temperature Control System.
• Worked on Seismic Instrument System by Syscom Instruments, Switzerland.